Troubleshooting Tips
What if I can’t make an Internet connection right after installation?
• First turn your MG7310 off for at least 8 seconds, then on, to see if
that fixes the problem.
• Check the connections you’ve made to your MG7310. Power and
coax connections are required, and up to 4 Ethernet connections
are optional. Are those connections good?
• Check that the MG7310’s power cube is plugged into a live outlet,
and that the Ethernet cable is connected securely to a computer.
• Make sure that your coax cable is live. You can check that by using it
with a TV.
• Check that you provided the correct setup information to your cable
service provider.
• Contact your cable service provider to make sure they’ve turned on
your Internet service.
What if my MG7310 has been working, then stops working?
• First turn your MG7310 off for at least 8 seconds, then on, to see if
that fixes the problem.
• If the MG7310’s lights don’t come on, check that the modem is
getting power from its power cube and that the MG7310’s power
button is on.
• Check your MG7310 cables.
• Check with your service provider. Sometimes there’s a service
outage or some other service issue.
To Next Page
Loading...
Need help?
General