Configuration Manager
Most MG7310 users never use the Configuration Manager. Here are some
reasons for using the Configuration Manager:
• You want to change the wireless router setup. For instance, maybe you’re
replacing a router and want to use your existing Wireless Network Name
and/or Password instead of the unique ones that come with the MG7310.
• You want to set up special Internet gaming settings.
• You want to set up parental controls including white lists and/or black lists
for certain users and times.
• You want to get performance information about the MG7310 modem and/or
built-in router. This can be helpful in optimizing wireless performance.
If you need to access the MG7310 Configuration Manager, open your Web
browser. Type http://192.168.0.1 in the address bar and press the Enter
key.
In the login dialog box, type the following User Name and Password in lower
case, then click OK.
User Name: admin
Password: motorola
The status page will appear. If the Status page doesn’t appear, please see
the Troubleshooting Tips below.
For details about the Configuration Manager, please see Chapter 6 in this
manual.
To Next Page
Loading...
