Prepare to activate
By now you should have:
• Subscribed to cable Internet service.
• Connected your MG7310.
• Powered up your MG7310. To do this, the On/Off button needs to be On.
Wait for the green online connection light to stop flashing and remain
solidly lit. This may take up to 15 minutes.
You should have a recent cable bill handy because it has your account
number and you’ll probably need that.
If you’re asked for information about the MG7310, you can find this on the
label on the bottom of the MG7310.
Activate
For some service providers, you activate by calling them. Many service
providers including Comcast and Cox prefer that you activate by opening the
Web browser of a computer that’s plugged into one of the MG7310’s
Ethernet ports.
If you don’t have a computer, you can use the Web browser of a Wi-Fi device
such as a smartphone or tablet. In that case you’ll need the unique Wireless
Network Name and Password printed on the bottom of your MG7310. You’ll
use these in setting up your wireless device to connect to the MG7310. Once
you’ve connected, you can open the browser of that wireless device.
To Next Page
Loading...
Need help?
General