EasyManua.ls Logo

Motorola moto e7i POWER - Insert or Remove SIM Card

Motorola moto e7i POWER
363 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Insert or remove SIM card
Your phone might support using an eSIM (embedded SIM card), in addition to the physical SIM card.
Contact your carrier for details.
About the SD card
Your phone supports an optional microSD card up to 1 TB.
The type to buy depends on how you'll format the card:
Portable storage (can use card in different devices): A Class 2, 4, or 6 card is sufficient.
Internal storage (card used only by phone): Use a high speed card such as UHS-1 type for best
performance. Class 2, 4, or 6 cards are slower than your phone’s internal storage, so using them for
internal storage would slow your phone's performance.
Learn more about the differences between portable storage and internal storage.
Set up eSIM
If your carrier provided you with an eSIM:
1. If you don't have a network connection, connect to Wi-Fi.
2. Go to Settings > Network & internet > SIM cards.
3.
Next to eSIM, tap > Take me there.
4. Tap the option to download an eSIM.
5. Follow onscreen instructions to set up your eSIM.
Replace SIM cardInsert or remove physical card
1. Close the phone and turn it face down.
2. If you want to remove the SD card, eject it first.
3. Insert the tool into the hole in the tray and gently push to pop it out.
4. Insert (gold contacts down) or remove the card.
Insert (gold contacts up) or remove the card.
Set up phone
4

Table of Contents

Related product manuals