Motorola Moto G – Disassemble Guide
Page 2 of 7
hp://www.fixez.com/
Near the dock connector toward the bottom of the
Moto G, insert the precision knife in the seam between
the front housing/frame and rear case.
This is a very tight seam so the use of the precision
knife is advised as oppose to the plastic opening tool.
1.
Once you have the first clip free, you can continue the
separation with your plastic opening tool. Work your
way around the entire smartphone, gently freeing the
clips until the rear case is removed.
2.
Next, locate and remove the fourteen T5 torx screws
that secure the protective cover/rear housing to the
front housing/frame (marked with orange circles).
You can now remove the protective cover/rear housing
from the Moto G (make sure to keep track of the power
& volume buttons).
3.
To Next Page
Loading...
