Put in the cards and power on
1 Insert the SIM tool into
the hole next to the tray
to pop out the tray.
Make sure you use the
correct size SIM card
and don't cut the SIM
card.
One-SIM model
Two-SIM model
SIM
SIM1
SIM2
2 Insert the SIM card(s)
with the gold contacts
down, then gently push
the tray into the slot.
Add a microSD card
(optional,
sold separately) for
additional storage.
3 Press and hold the
power button, then
follow the prompts to
get started.
Nano SIM
Help and more
Get answers, updates and info:
• Help is here: from the Home screen, swipe up and tap Settings > Help
to learn how to use your phone and get support.
• Get more: get software, user guides and more at
www.motorola.com/mymotog.
• Get apps: tap Play Store to browse and download apps.
• Uninstall an app: touch and hold the app, then drag it to Uninstall.
• Backup and restore: log in to your Google account to restore contacts,
calendar and more.
Legal information. This guide provides important legal, safety and
regulatory information that you should read before using your product. For
the complete legal information, from the Home screen swipe up and tap
Settings >
, then type Legal information or visit
www.motorola.com/device-legal.
Battery safety. To prevent possible burning and injury, the battery in your
phone should only be removed by a Motorola-approved service centre or
similar skilled personnel.
If your phone becomes unresponsive, press and hold the power button
until the screen goes dark and your phone restarts. Charge your phone
using a compatible Motorola charger (may be sold separately). Use of other
chargers is not recommended and may impair the charging performance.
Don't charge your phone in temperatures below -20°C or above 45°C.
Chargers that do not comply with applicable national standards may be
unsafe, with risk of death or injury, and may cause slow charging or product
damage. To view applicable standards and to learn more, see the "Legal
information" section of this guide or visit www.motorola.com/device-legal.
Warning about high volume usage. To prevent possible hearing
damage, do not listen at high volume levels for long periods. When
your headset volume reaches the high volume threshold, a warning
will be shown. Tap OK to dismiss it, or wait one to five seconds, then
press the Volume up button to dismiss the alert and enable the volume to
continue to be adjusted.
Disposal and recycling. For help recycling products and packaging
responsibly, visit www.motorola.com/recycling.
Class 1 laser. This device is classified as a Class 1 Laser
product, which is safe in normal use per IEC60825-1:2007
and IEC60825-1:2014. This device complies with 21 CFR
1040.10 and 1040.11, except for deviations pursuant to Laser Notice 50, dated
24 June 2007. Do not attempt to modify or disassemble the laser focusing
system.
Extreme heat or cold. Don't use your phone in temperatures below -20°C or
above 45°C. Don't store/transport your phone in temperatures below -20°C
or above 60°C.
Legal disclaimers. Features, services and applications are network
dependent and may not be available in all areas; additional terms/charges
may apply. Product specifications and other information contained in this
guide are believed to be accurate at the time of printing. Motorola reserves
the right to correct or change any information without notice.
Arbitration. Your purchase is governed by a binding arbitration clause. For
more information and how to opt out, see the legal guide that came with
your phone.
CLASS 1 LASER PRODUCT
Water repellent. Your phone is not waterproof. For more about your phone's
water-repellent design and care, swipe up and tap Settings > Help.
To Previous Page
Loading...
