Use NFC (near-field communication) to pay quickly and securely at checkout registers by touching your
phone to an electronic reader.
Set up Tap & pay
1. Make sure you have:
•
Set up a payment app on your phone. Install one from Play Store if needed.
•
Turned on NFC.
2. Go to Settings > Apps & notifications.
3. Touch Default apps > Tap & pay.
Or, touch Advanced > Default apps > Tap & pay.
4. Touch Payment default.
5. Touch an app to make it your default payment app.
Note: This feature manages payment apps. Tap & pay doesn’t apply to Android Beam and won’t include
certain apps, such as money transfer apps.
Make a payment
1. Make sure NFC is on and that the terminal has this symbol:
2. Unlock your phone and touch its back to the terminal.
Your payment app might require you to open the app and enter a PIN before touching your phone to
the terminal.
Turn off Tap & pay
Turn off NFC. If you do this, you also turn off other features that use NFC.
When NFC is off, Tap & pay is not included in Settings.
Share or receive with NFC
Only some versions of this phone, sold in certain countries, support this feature.
NFC (near-field communication) makes it easy to securely share with sources you trust, without having to
type a lot of information or struggle with pairing.
Turn NFC on
1. Go to Settings > Connected devices > Connection preferences.
2.
Turn NFC on .
If you don't see this option, then your phone doesn't support NFC.
Settings : Connected devices
118
To Next Page
Loading...
