Advanced Features
English
48
6 b or c to On to enable All Tones. The display shows 9
beside On.
OR
b or c to Off to disable All Tones. The display shows
9 beside Off.
Setting the Tone Alert Volume Offset Level
You can adjust the Tone Alert Volume Offset level if needed.
This feature adjusts the volume of the tones/alerts, allowing it to
be higher or lower than the voice volume.
Procedure:
1 g to access the menu.
2 b or c to Utilities and press g to select.
3 b or c to Radio Settings and press g to select.
4 b or c to Tones/Alerts and press g to select.
5 b or c to Vol. Offset and press g to select.
6 b or c to the required volume value. The radio sounds
a feedback tone with each corresponding volume value.
7 Press g to keep the required displayed volume value.
OR
Repeat Step 6 to select another volume value.
OR
e to exit without changing the current volume offset
settings.
Turning the Talk Permit Tone On or Off
You can enable and disable the Talk Permit Tone if needed.
Procedure:
1 g to access the menu.
2 b or c to Utilities and press g to select.
3 b or c to Radio Settings and press g to select.
4 b or c to Tones/Alerts and press g to select.
5 b or c to Talk Permit and press g to select.
NAG.book Page 48 Monday, March 25, 2013 4:59 PM
To Next Page
Loading...
