Advanced Features
English
49
6 b or c to On to enable Talk Permit Tone. The display
shows 9 beside On.
OR
b or c to Off to disable Talk Permit Tone. The display
shows 9 beside Off.
Turning the Power Up Alert Tone On or Off
You can enable and disable the Power Up Alert Tone if needed.
Procedure:
1 g to access the menu.
2 b or c to Utilities and press g to select.
3 b or c to Radio Settings and press g to select.
4 b or c to Tones/Alerts and press g to select.
5 b or c to Power Up and press g to select.
6 b or c to On to enable Power Up Tone. The display
shows 9 beside On.
OR
b or c to Off to disable Power Up Tone. The display
shows 9 beside Off.
Setting the Power Level
You can customize your radio’s power setting to high or low for
each channel.
Settings: High enables communication with radios located at
a considerable distance from you.
Low enables communication
with radios in closer proximity.
Procedure:
Press the programmed Power Level button to toggle transmit
power level between high and low.
OR
Follow the procedure below.
1 g to access the menu.
2 b or c to Utilities and press g to select.
3 b or c to Radio Settings and press g to select.
NAG.book Page 49 Monday, March 25, 2013 4:59 PM
To Next Page
Loading...
