Advanced Features
English
50
4 b or c to Power and press g to select.
5 b or c to the required setting and press g to select.
9 appears beside selected setting.
6 Screen returns to the previous menu.
Long press
e to return to the Home screen. The power level
icon is visible.
Adjusting the Display Brightness
You can adjust radio’s display brightness as needed.
Procedure:
Press the programmed Brightness button and proceed to
Step 5.
OR
Follow the procedure below.
1 g to access the menu.
2 b or c to Utilities and press g to select.
3 b or c to Radio Settings and press g to select.
4 b or c to Brightness and press g to select.
5 The display shows a progress bar. Decrease display
brightness by pressing
b or increase the display
brightness by pressing c . Press g to confirm your entry.
Turning Horns/Lights On or Off
Your radio is able to notify you of an incoming call via the horns
and lights feature. When activated, an incoming call sounds
your vehicle's horn and turns on its lights.
This feature needs to be installed through your radio’s rear
accessory connector by your dealer.
Procedure:
Press the programmed Horns/Lights button to toggle horns
and lights feature on or off.
OR
Follow the procedure below.
1 g to access the menu.
2 b or c to Utilities and press g to select.
3 b or c to Radio Settings and press g to select.
4 b or c to Horns/Lights and press g to select.
NAG.book Page 50 Monday, March 25, 2013 4:59 PM
To Next Page
Loading...
