Keypad Microphone Features
English
62
Making a Group, Private or All Call by Alias Search
You can also use alias or alphanumeric search to retrieve the
required subscriber alias.
This feature is only applicable while in Contacts.
Procedure:
1 g to access the menu.
2 b or c to Contacts and press g to select. The
entries are alphabetically sorted.
3 Key in the first character of the required alias.
4 A blinking cursor appears.
Use the keypad to type the required alias.
Press
b to move one space to the left.
Press c to move one space to the right.
Press * to delete any unwanted characters.
5 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
aliases with the same name, the radio displays the alias that
is listed first in the Contacts list.
6 Press the PTT button to make the call. The green LED lights
up. The first line displays the target radio’s ID. The second
line displays the call type and the Call icon.
7 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone
8 Release the PTT button to listen. When the target radio
responds, the green LED blinks. The display shows the
destination alias.
9 If the Channel Free Indication feature is enabled, you
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a programmed period of time,
the call ends.
10 You hear a short tone. The display shows Call Ended.
NOTE: Press e button or g to exit alias search.
Viewing an Entry in the Scan List by Alias Search
Procedure:
1 g to access the menu.
2 b or c to Scan and press g to select.
NAG.book Page 62 Monday, March 25, 2013 4:59 PM
To Next Page
Loading...
