Motorola MOTOTRBO CM300d

Keypad Microphone Features
English
63
3 b or c to Scan List and press g to select.
4 Key in the first character of the required alias.
5 A blinking cursor appears.
Use the keypad to type the required zone.
Press # to move one space to the right.
Press
* to delete any unwanted characters.
Long press 0 to toggle between lower case and upper
case.
6 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
entries with the same name, the radio displays the entry that is
listed first in the scan list.
Editing the Scan List by Alias Search
Adding a New Entry to the Scan List
Procedure:
1 g to access the menu.
2 b or c to Scan and press g to select.
3 b or c to Scan List and press g to select.
4 b or c to Add Member and press g to select.
5 Key in the first character of the required alias.
6 A blinking cursor appears.
Use the keypad to type the required zone.
Press
# to move one space to the right.
Press * to delete any unwanted characters.
Long press 0 to toggle between lower case and upper
case.
7 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
aliases with the same name, the radio displays the alias that
is listed first in the list.
8 Press g to select.
9 b or c to the required priority level and press g to
select.


NAG.book Page 63 Monday, March 25, 2013 4:59 PM