Disassembly/Reassembly Procedures: Disassembling and Reassembling the Control Head– General 5-7
2. Remove the control head flex from brick as shown in Figure 5-3.
Figure 5-3 Control Head Removal
5.5.3 Cable Disassembly from Handheld Control Head
1. Disassemble the cable from the connector and unlock the cable by twisting the collar
clockwise as shown in Figure 5-4.
Figure 5-4 Collar twisting
Transceiver adapter
Control Head Flex
Snap-fit Catch
To Next Page
Loading...