Motorola MOTOTRBO DM4400 - Page 36

5-8 Disassembly/Reassembly Procedures: Disassembling and Reassembling the Control Head– General
2. Pull the cable downwards as shown in Figure 5-5.
Figure 5-5 Cable Removal
5.5.4 Handheld Control Head Disassembly
1. Remove the two screws from the back housing by using TORX Plus™ 6IP driver as shown in
Figure 5-6.
Figure 5-6 Screws Removal
Collar
Cable
Screws