English
12
Numeric Display Radio
1. Turn on your Bluetooth-enabled device and place it in
pairing mode. Refer to respective Bluetooth-enabled
device’s user manual.
2. On your radio, press the programmed Bluetooth
Connect button.
3. A tone sounds and LED blinks yellow.
4. Your Bluetooth-enabled device may require additional
steps to complete the pairing. Refer to respective
Bluetooth-enabled device’s user manual.
5. If successful, a positive tone sounds.
OR
If unsuccessful, a negative indicator tone sounds.
NOTE: Your radio connects to the Bluetooth-enabled
device within range with either the strongest
signal strength, or to one which it has connected
to before in a prior session.
Voice Announcement
Color Display Mobile Radio
Press the programmed Voice Announcement button.
OR
Follow the procedure below.
1. g to access the menu.
2. f or h to Utilities and press g to select.
3. f or h to Voice Announcement.
4. Press g to enable Voice Announcement. The display
shows beside Enabled.
OR
Press g to disable Voice Announcement. The
disappears from beside Enabled.
Intelligent Audio
Color Display Mobile Radio
Press the programmed Intelligent Audio button to toggle
the feature on or off.
OR
Follow the procedure below.
1. g to access the menu.
2. f or h to Utilities and press g to select.
3. f or h to Radio Settings and press g to select.
4. f or h to Intelligent Audio.
5. Press g to enable Intelligent Audio. The display
shows beside Enabled.
OR
Press g to disable Intelligent Audio. The
disappears from beside Enabled.
To Previous Page
Loading...
