English
11
Numeric Display Radio
1. Press the programmed Emergency On button or the
Emergency footswitch.
2. The green LED lights up.
3. When an Emergency Alarm acknowledgment is
received, the Emergency tone sounds. The green LED
blinks.
OR
If your radio does not receive an Emergency Alarm
acknowledgement, and after all retries have been
exhausted, a low-pitch tone sounds.
4. Radio exits the Emergency Alarm mode.
Privacy
Press the programmed Privacy button to toggle privacy on
or off.
Finding and Connecting to a Bluetooth
Device
NOTE: Do not turn off your Bluetooth-enabled device or
press e during the finding and connecting
operation as this cancels the operation.
A pin code may be required to be programmed in
your radio before it can pair with some devices.
Contact your dealer for more information
Color Display Mobile Radio
1. Turn on your Bluetooth-enabled device and place it in
pairing mode. Refer to respective Bluetooth-enabled
device’s user manual.
2. On your radio, press g to access the menu.
3. f or h to Bluetooth and press g to select.
4. f or h to Devices and press g to select.
5. f or h to the required device and press g to
select.
OR
f or h to Find Devices to locate available devices.
f or h to the required device and press g to
select.
6. f or h to Connect and press g to select. Display
shows Connecting to <device>.
Your Bluetooth-enabled device may require additional
steps to complete the pairing. Refer to respective
Bluetooth-enabled device’s user manual.
7. If successful, the radio display shows
<Device> Connected. A tone sounds and appears
beside the connected device. The Bluetooth Connected
icon appears on the status bar.
OR
If unsuccessful, the radio display shows
Connecting Failed.
To Next Page
Loading...
