Motorola MOTOTRBO DM4600

English
10
3. f or h to Quick Text and press g to select.
4. f or h to the required Quick Text and press g to
select.
5. f or h to the required alias or ID and press g to
select.
6. The display shows transitional mini notice, confirming
your message is being sent.
7. If the message is sent, a tone sounds and the display
shows positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Numeric Display Radio
1. Press the programmed One Touch Access button to
send a predefined Quick Text message to a predefined
ID.
2. The green LED lights up.
3. Two chirps indicate that the message is sent
successfully.
OR
A low-pitched tone indicates that the message cannot
be sent.
Sending an Emergency Alarm
NOTE: If your radio is set to Silent, it will not display any
audio or visual indicators during Emergency
mode.
Color Display Mobile Radio
1. Press the programmed Emergency On button or the
Emergency footswitch.
2. The display shows Tx Alarm and the destination alias.
The green LED lights up and the Emergency icon
appears.
OR
The display shows Tx Telegram and the
destination alias. The LED lights up solid green and the
Emergency icon appears.
3. When an Emergency Alarm acknowledgment is
received, the Emergency tone sounds and the green
LED blinks. The display shows Alarm Sent.
OR
If your radio does not receive an Emergency Alarm
acknowledgement, and after all retries have been
exhausted, a tone sounds and the display shows
Alarm Failed.
4. Radio exits the Emergency Alarm mode and returns to
the Home screen.

