Motorola MOTOTRBO DM4600

English
9
Scanning Channels
NOTE: This feature is not applicable in Capacity Plus and
Linked Capacity Plus.
Press the programmed Scan button to turn scan on or off.
During scan, the LED blinks yellow and the scan icon is
displayed
.
Making a Call Alert
Color Display Mobile Radio
Press the programmed One Touch Access button and
proceed to Step 5.
OR
Follow the procedure below.
1. g to access the menu.
2. f or h to Contacts and press g to select.
3. f or h to the required subscriber alias or ID and
press g to select.
4. f or h to Call Alert and press g to select.
5. The display shows Call Alert and the subscriber
alias or ID, indicating that the Call Alert has been sent.
6. The green LED lights up when your radio is sending the
Call Alert.
7. If the Call Alert acknowledgement is received, the
display shows positive mini notice.
OR
If the Call Alert acknowledgement is not received, the
display shows negative mini notice.
Numeric Display Mobile Radio
1. Press the programmed One Touch Access button to
make a Call Alert to the predefined ID.
2. The green LED lights up when your radio is sending the
Call Alert.
3. If the Call Alert acknowledgement is received, two
chirps sound.
OR
If the Call Alert acknowledgement is not received, a
low-pitched tone sounds.
Sending a Quick Text Message
Color Display Mobile Radio
Press the programmed Text Message button and proceed
to Step 3.
OR
Press the programmed One Touch Access button to send
a predefined Quick Text message to a predefined alias or
ID and proceed to Step 6.
OR
Follow the procedure below.
1. g to access the menu.
2. f or h to Messages and press g to select.


