English
5
LED Indicator
Blinking red – Radio is receiving an emergency
transmission or has failed the self-test upon powering up.
Solid green – Radio is powering up, or transmitting. Also
indicates full charge of the battery when Battery Strength
button is pressed.
Solid green – Radio is powering up, or transmitting
Blinking green – Radio is receiving a non-privacy-enabled
call or data, or detecting activity over the air.
Double blinking green –Radio is receiving a
privacy-enabled call or data.
Solid yellow – Radio is monitoring a conventional channel.
Blinking yellow – Radio is scanning for activity or
receiving a Call Alert, or all local Linked Capacity Plus
channels are busy.
Double blinking yellow – Radio is no longer connected to
the repeater while in Capacity Plus or Linked Capacity
Plus, all Capacity Plus or Linked Capacity Plus channels
are currently busy, Auto Roaming is enabled, radio is
actively searching for a new site. Also indicates radio has
yet to respond to a group call alert, or radio is locked.
NOTE: For Capacity Plus and Linked Capacity Plus,
there is no LED indication when the radio is
detecting activity over the air.
Powering Up and Turning Off the Radio
Rotate the Volume/Channel Knob clockwise until you
hear a click. You see MOTOTRBO (TM) on the radio’s display
momentarily, followed by a welcome message or welcome
image.
The LED lights up solid green and the Home screen lights
up if the backlight setting is set to turn on automatically.
To turn off the radio, rotate this knob counterclockwise until
you hear a click. You see a brief Powering Down on the
radio’s display.
Adjusting the Volume
To increase the volume, turn the Volume/Channel Knob
clockwise.
To decrease the volume, turn this knob counterclockwise.
NOTE: Your radio can be programmed to have a
minimum volume offset where the volume level
cannot be turned down fully. Check with your
dealer or system administrator for more
information.
To Next Page
Loading...
