Connect Your Devices
WiFi Wireless
You can connect any of your WiFi devices by first going into
the WiFi setup section for the device. Then use the Wi-Fi
SSID/Network Name and Wi-Fi Password/Key printed on the
label on the bottom of the MR2600 router.
Wired Ethernet
You can also connect up to four HDTVs, computers, game
stations, or other devices with an Ethernet cable between an
Ethernet port of the device and any one of the LAN jacks on
the router. Some devices have a Network Setup section
where you specify a wired Ethernet connection. If you have a
problem with a particular device, consult its user manual.
Once you’ve set up a Wireless or Wired Ethernet connection,
try to browse the Web. If browsing works, Congratulations!
Your MR2600 is working.
If your MR2600 is NOT working, see Troubleshooting Tips
below.
To Next Page
Loading...
