50 MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION
Data Expansion Head Enhanced with 3rd Party Control Head
The Data Expansion Head Enhanced can be used with a “virtual head” on a PC or a third party
control head.
This configuration allows the controlling of the radio (Transceiver Box) with a Control Terminal (for
example: Personal Computer, Laptop, Console, and so forth). In this configuration, the Control
Terminal is a substitute for the Enhanced Control Head. The Control Terminal is connected to the
25-pin socket of the Data Expansion Head Enhanced via the GMKN4079 cable (see section
“Connecting Cables” on page 69 for more information).
Figure 21 Configuration with Remote Control Terminal and Data Terminal
Accessory
Connector (20-Pin
Power Connector
BNC Antenna
Connector
FME GPS Conn.
8-Wire RS232 Interface
Data
Terminal
MTM800 Enhanced
Transceiver
Box
Control
Terminal
TELCO
Connector
(10-Pin)
25-Pin subD
Connector
(female)
9-Pin subD
Connector
(female)
RS232
Interface
Top view to the chassis
RS232
Interface
Cable: GMKN4079
SB9600
Interface
Data Expansion
Head Enhanc
ed
To Next Page
Loading...
