Motorola MC2100 Series User Manual

11
4
10
2
3
17
16
1
8
9
12
15
14
13
5
6
LED
7
2 Insert the Battery
GETTING STARTED
LED Notifications
Charging Status:
Data Capture Status:
Solid green: Fully charged
Blinking amber: charging
Fast blinking amber: Charging error
Red: Scanning active
Green: Good decode
4 Charge the Battery
Four-slot Battery Charger
3 Charge the MC21XX
Single-slot USB Charging Cradle
*
24 hr
*
MC2100 SERIES
1 Install a microSD Card
1. Slide the card door down to unlock.
2. Lift card door.
3. Place the microSD card into the holder with the
contacts facing down.
NOTE :
The proper position of the microSD card —
the card connector (i.e., gold area) should be facing down.
4. Lower the card door.
5. Slide card door up to lock into place.
To replace the microSD card, refer to the MC2100 Series
User Guide for instructions.
It is recommended that this product be charged for 24 hours before the first
use to ensure that the internal battery is fully charged.
FEATURES
Power Supply
To warm boot the MC21XX, press and hold the Power
button for five (5) seconds.
To cold boot the MC21XX:
1. Press Power button to suspend the MC21XX. The PowerKey
Action window appears.
2. Tap Safe Battery Swap.
3. Wait for the LED to turn red and then turn off.
4.
Simultaneously press the 1, 9 and Power button.
1 LED Indicator
2 Volume Up Button
(default) - Programmable
3 Volume Down Button
(default) - Programmable
4 Microphone
5 Power Button
6 I/O Connector
12 Battery
13 Battery Latches
14 Speaker
15 Handstrap Mount
QUICK START
GUIDE
Charging Status:
Solid green: Fully charged
Blinking amber: charging
Fast blinking amber: Charging error
16 Scan Exit Window
(see Data Capture Options)
17 Mini Stylus
7 Power Input Port
8 Keypad
9 Navigation
10 Scan Button
11 Touch Screen
(with screen protector)
(MC2180 only)
(MC2180 only)
(MC2180 only)
Note:

Motorola MC2100 Series Specifications

General

Brand	Motorola
Model	MC2100 Series
Category	Handhelds
Language	English

Summary

MC2100 Series Device Features

Component Identification

Lists and identifies all physical buttons, ports, screen, and other components of the MC2100 device.

LED Notification Status

Details the status indicators for charging and data capture via LED lights.

MC2100 Series Initial Setup

microSD Card Installation

Guide to unlocking the card door and inserting the microSD card correctly into the MC2100.

Battery Insertion and Charging

Steps for inserting the battery and connecting the MC2100 for charging.

MC2100 Series Operations

Battery Removal Procedure

Instructions on how to safely suspend the device and eject the battery.

Host Communication Setup

Steps for installing ActiveSync and establishing a connection between MC2100 and host computer.

Accessory Overview

Lists and describes optional accessories like screen protectors, cradles, and holsters.

Handstrap and Lanyard Installation

Detailed instructions for attaching the handstrap and lanyard for secure device handling.

Data Capture Options

Illustrates scanning and imaging capabilities for data capture.

Ergonomic Considerations

Provides guidance on safe posture and movement to prevent injury during device use.