Need help?Do you have a question about the Motorola MT512M and is the answer not in the manual?
Outlines installation requirements for compliance with radio frequency energy exposure safety standards.
Lists detailed technical specifications for the MTM800 Enhanced mobile terminal models.
Details the procedure for planning and installing the DC power cable for the terminal.
Explains the steps for installing the ignition sense cable to enable terminal control via the vehicle ignition switch.
Describes how to install the radio into an automotive dashboard and mount it within the frame.
Introduces the components and general setup for installing the terminal in a remote mount configuration.
Guides the installation and mounting of the control head for motorcycle applications.
Describes the pin functions of the 20-pin accessory connector located on the rear of the transceiver.
Continues the detailed description of the pin functions for the 20-pin accessory connector.
Details the pin assignment and functions of the 25-pin subD connector for the Data Expansion Head Enhanced.
Lists the pin functions for the 10-pin MMP connector on the Enhanced Control Head.
To Next Page
General
