23
English
If the Service Provider configured the MTP700 to Manual Mode
Switch:
1. If the MTP700 is NOT in Private Mode, a Prvt Call message and
the caller ID is displayed momentarily. The display returns to the
mode it was in before the incoming call arrived.
2. To answer the call, press , and then the PTT key.
3. To end the call, press .
If the called person ends the call, the Call Ended message is
displayed.
Phone and PABX Calls
The Phone Mode allows you to call a landline telephone number or
a cellular mobile phone number. In this publication we use “phone
number” when referring to these numbers.
The Private Automatic Branch Exchange (PABX) Mode allows
you to call local (office) extension numbers. This mode needs to be
activated by your Service Provider.
Both modes have the same dialling features.
Making a Phone or PABX Call
1. Press until Phone Mode appears on your display.
If a PABX call is required, press again. PABX Mode appears
on your display.
2. Proceed as for making and receiving Private phone calls
For call alert, see settings in the Vibrate menu option and the Tones menu
option
.
While Transmit Inhibit is activated, an incoming Phone or PABX Call
is indicated, but it is not possible to answer the call.
6866539D36_A.book Page 23 Friday, October 27, 2006 12:20 PM
To Next Page
Loading...
