7
Safety Instructions
Wi-Fi
®
CAMERA UNIT SET UP & USE:
•
Choose a location for the Camera that will provide the
best view of your baby in his/her crib.
•
Place the Camera on a flat surface, such as a dresser,
bureau or shelf, or mount the Camera on a wall securely
using the keyhole slots in the underside of the stand.
•
NEVER place the Camera or cords within the crib.
WARNING
This Camera is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as de-scribed in
the User’s Guide, safe to use. Therefore, always read the
instructions in this User’s Guide carefully before using the
device.
• Adult assembly is required. Keep small parts away from children
when assembling.
• This product is not a toy. Do not allow children to play with it.
•
This Camera is not a substitute for responsible adult
supervision.
•
Keep this User Guide for future reference.
• Keep the cords out of reach of children.
•
Do not cover the Camera with a towel or blanket.
• Test this camera and all its functions so that you are familiar with
it prior to actual use.
• Do not use the Camera in damp areas or close to water.
•
Do not install the Camera in extreme cold or heat, direct
sunlight, or close to a heat source.
•
Only use the chargers and power adapters provided. Do not use
other chargers or power adapters as this may damage the
device.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adapters to easily accessible electrical sockets.
•
The wall mounting height is less than 2m for the Camera.
To Next Page
Loading...
Need help?
General
