Motorola PIP1500-2 - Getting Started: Baby Unit Setup; Connecting Baby Unit Power Supply

10
Getting Started
2. Getting Started
2.1
Connecting the Power Supply for the Baby Unit
•
Insert the DC plug of the power
adapter into the DC socket on the
back of the Baby Unit.
•
Connect the other end of the
power adapter to a suitable
electrical outlet.
•
The baby unit turns on and the
power indicator lights up blue.
Note
Only use the supplied power
adapter (DC5V/1500mA).
2.2 Fixing mount to the wall
• Mark the position of the screw holes on the wall.
•
Install wall anchors (if suitable for the wall type) and the wall
mounting screws.
•
Fix the camera on the wall mount bracket by fastening the screw.
Screw