Overview of Your Baby Unit
Important guidelines for installing your Video Baby Monitor
• To use your Baby Unit and Parent Unit together, you must be able to
establish a radio link between them, and the range will be aected by
environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic
door or reinforced concrete, between the Baby Unit and Parent Unit may
block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls,
or by radio or electrical equipment, such as TVs, computers, cordless or
mobile phones, fluorescent lights or dimmer switches.
• Other 2.4GHz products, such as wireless networks (Wi-Fi® routers),
Bluetooth™ systems, microwave ovens or other Baby Monitors, may cause
interference with this product, so keep the Baby Monitor at least 5ft (1.5m)
away from these types of product, or switch them o if they appear to be
causing interference.
• If the signal is weak, try moving the Parent and/or the Baby Unit to dierent
positions in the rooms.
1.
Photo sensor (Night Vision
Mode)
2.
Camera lens
3.
Infrared LEDs under the camera
lens (x 8, for night vision)
4.
High sensitivity microphone
5.
Antenna
6.
Power/Link LED indicatior
7. PAIR button
8. Speaker
9. Power Socket
10. Temperature Sensor
1
2
4
5
3
10
9
8
7
6
To Next Page
Loading...
Need help?
General
