Motorola PIP1500 User Manual

14
3. Using the video baby monitor
3.1 Zoom the screen
1. Press MENU on the the parent unit. The status bar pops up and
is
selected.
2. Scroll the navigation button to select 1x or 2x zoom.
Note
Once the zoom function is selected, it exits from the main menu. The other
selections cannot be done until entering the main menu again.
You can also do zoom by pressing OK on the parent unit during monitoring
your baby.
3.2 Adjust the brightness on the parent unit
1. Press MENU on the parent unit. The status bar pops up.
2. Scroll the navigation button to .
3. Scroll the navigation button to select the brightness level. There are 8 levels
to choose from.
3.3 Enable Lullabies and Soothig sounds playback
You can play back preloaded audio content (lullabies and soothing sounds) on
the baby (camera) unit to soothe the baby. There are 5 preloaded lullabies/
soothing sounds in the baby (camera unit).
3.3.1 Lullabies/Soothing sounds playback
1. Press MENU on the parent unit. The status bar pops up.
2. Scroll the navigation button to .
3. Scroll the navigation button to select , then press OK.
4. Scroll the navigation button to select a desired lullaby or stop listening.
Press OK to start or stop playback.
Using the video baby monitor

Motorola PIP1500 Specifications

General

Night mode	Yes
Maximum range	300 m
Volume control	Buttons
Smartphone support	-
Interface	FHSS
Frequency band	2.4 GHz
Speaker type	2-way
Product color	Black, White
Display diagonal	5 \
Display resolution	480 x 272 pixels
Battery capacity	2800 mAh
Power source type	Battery
Battery life (max)	7 h