9
3. When the parent unit is fully charged, will appear steadily on the screen
display.
4. Press and hold the power button on the top of the parent unit to turn it on
and o.
Battery low warning
If is shown on the display, recharge the parent unit before using it again.
When charging, will scroll on the display.
Battery performance
In ideal conditions, fully charged batteries should give up to 7 hours usage
time.
The charge capacity of the rechargeable battery will reduce with time as it
wears out, giving the parent unit less usage / standby time. Eventually it will
need to be replaced.
Batteries and the parent unit may become warm during charging. This is
normal.
Note
If is displayed on the screen, the parent and baby (camera) units are not
linked to each other. Make sure that both units are powered on.
Your PIP1510 CONNECT, PIP1510-2 CONNECT, PIP1510-3 CONNECT or
PIP1510-4 CONNECT is now ready for use.
Getting started
To Next Page
Loading...
Need help?
General
