50
English
TRUNKED FEATURES
Note: The programming-mode annunciator, K,
blinks while program mode is active.
• In the edit mode, the , key functions as
a backspace key. Pressing it will erase the
previous digit, and the cursor will move to
the left. When the last digit on the display
has been erased, additional presses of this
key or the / key will cause you to leave
the edit mode without making any
changes.
• You can only enter a maximum of 16 digits
in any entry for the telephone list. When
this maximum is reached, the cursor will
disappear. If you try to add any more digits,
you will hear an invalid (bad) keypress alert
tone.
Programming the Call List
This feature lets you use the radio’s keypad to
change the radio ID numbers assigned to the call list
used by the trunked Private Conversation™ and
Call Alert™ features.To change the call list radio ID
numbers.
10.
When you have finished changing the tele-
phone number, press the
select
key again.
The change is saved in the radio’s memory.
11.
You are returned to step
5. The display will again
alternate between
showing the member’s
name and telephone
number. You can now
change additional num-
bers.
Alternates between
and
12.
When you have finished making changes,
press
.
to exit program mode.
13.
The radio will return to
the home display.
POLICE DEPT
5556445
PLANT POLICE
1.
/ until
PROG
is dis-
played.
2.
l (the softkey below
PROG
).
3.
l (the softkey below
CALL
). The display
shows the first program-
mable member of the
call list.
DIR PHON PROG
SCAN PHON CALL
RICARDO
To Next Page
Loading...
