44 Wireless
Note: Keep it secure. To protect your phone and
hotspot from unauthorized access, it is strongly
recommended that you set up hotspot
Security
(
WPA2
is the most secure), including password.
•
Broadcast Channel
: Select a channel that
minimizes potential interference. You may need
to try different channels after your hotspot is
active for a time.
3 Touch
Save
when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot’s
SSID
,
selecting a
Security
type, and entering the correct
Password
.
Wi-Fi modes
For those who like to get a bit more technical, your
phone supports the following Wi-Fi modes:
802.11 b, g, n.
Bluetooth
®
handsfree devices
Turn Bluetooth power on or off
Touch Menu >
System settings
, then touch the
Bluetooth
power switch to turn it or .
Note: To extend battery life, turn off Bluetooth power
when not in use.
Connect new Bluetooth devices
Note: This feature requires an optional accessory.
To connect with a new Bluetooth headset or other
device, you need to pair with it. You only need to do this
once for each device—to connect again, just turn on the
device.
1 Make sure the Bluetooth device you are pairing with
is in discoverable mode.
Note: Refer to the guide that came with the
Bluetooth device for details.
2 Touch Menu >
System settings
>
Bluetooth
.
3 Touch the
Bluetooth
power switch to turn it and
scan. If Bluetooth power is already on, touch
SEARCH
FOR DEVICES
.
4 Touch a device to connect.
5 If necessary, touch
OK
, or enter the device passkey
(like
0000
) to connect to the device. When the device
is connected, the Bluetooth connected indicator
appears in the status bar.
ON OFF
To Next Page
Loading...
Need help?
General
