Safety and General Inforation
10
These recommended RF exposure levels include
substantial margins of protection.
All Motorola two-way radios are designed,
manufactured, and tested to ensure they meet
government-established RF exposure levels. In
addition, manufacturers also recommend specific
operating instructions to users of two-way radios.
These instructions are important because they
inform users about RF energy exposure and
provide simple procedures on how to control it.
Please refer to the following websites for more
information on what RF energy exposure is and
how to control your exposure to assure compliance
with established RF exposure limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov/SLTC/
radiofrequencyradiation/index.html
Federal Communication Commission
(FCC) Regulations (US markets only)
The FCC rules require manufacturers to comply
with the FCC RF energy exposure limits for
portable two-way radios before they can be
marketed in the U.S. When two-way radios are
used as a consequence of employment, the FCC
requires users to be fully aware of and able to
control their exposure to meet occupational
requirements. Exposure awareness can be
facilitated by the use of a product label directing
users to specific user awareness information. Your
Motorola two-way radio has a RF Exposure
Product Label.
Do not remove this RF Exposure
Label from the device. Also, your Motorola user
manual, or separate safety booklet includes
information and operating instructions required to
control your RF exposure and to satisfy compliance
requirements.
Compliance with RF Exposure
Standards
Your Motorola two-way radio is designed and
tested to comply with a number of national and
International standards and guidelines (listed
below) for human exposure to radio frequency
electromagnetic energy. This radio complies with
the IEEE (FCC) and ICNIRP exposure limits for
occupational/controlled RF exposure
environments at operating duty factors of up to
50% talk-50% listen and is authorized by the
IEEE/ICNIRP for occupational use only.
In terms of measuring RF energy for compliance
with these exposure guidelines, your radio
generates measurable RF energy only while it
is transmitting (during talking), not when it is
receiving (listening) or in standby mode.
6864110R04b.book Page 10 Friday, October 20, 2006 4:38 PM
To Next Page
Loading...
Need help?
General
