Motorola RDU2020 - RDX Series Programming Quick Reference; Programming Quick Reference: Frequency; Programming Quick Reference: Interference Eliminator Code; Programming Quick Reference: Bandwidth

RDX Series Programming Quick Reference
Function Appearance
Press & hold
side button 1
for 3 sec. and turn on radio to enter
programming mode.
Frequency
Press
\ until l displays. To
change, press
[ or ] .
*depending upon model
*depending upon model
Interference
Eliminator
Code
Appears after
l shows. Set
for each channel.
Bandwidth
Press \ until K displays. Press
[
or
]
to select D (25.0 kHz)
or C (12.5 kHz).
Note: If bandwidth is not flashing,
it is not selectable on the
chosen frequency.
RDX Series Programming Quick Reference
Radio On Visual \as needed, then [ or ]
Call Tone
Choose1, 2, 3, or
0 = Off (default).
6864110R04b.book Page 60 Friday, October 20, 2006 4:38 PM