Symbols on the Remote Control Unit
RF signal strength of the Remote Control against the Pet Collar Unit.
Displays when you enter Menu mode.
Alert indication on Collar 3 (battery low, out of range, etc).
Battery level on Remote Control Unit.
Pet Collar Number.
Select to REMOVE collar.
Select to PAIR collar.
Displays the selected STATIC CORRECTION LEVEL (Level 0 to 15).
When 0 is displayed, only tone and vibration alerts are sent to the Pet
Collar Unit.
Displays when PUSH-TO-TALK KEY is pressed.
Displays when VIBRATION KEY is pressed.
Displays when TONE KEY is pressed.
To Next Page
Loading...
Need help?
General
