3
Getting Started
Setting Up the Charging Base
Your expansion handset does not require a phone line,
just charge the battery, and register it to the base. To set
up your Motorola Expansion Handset:
1 Plug the power cord into the back of the
charging base.
2 Plug the power cord into an electric outlet.
Charging the Handsets
Place the handset in the charging base. The LED is solid
red when the handset is charging.
Note: The initial battery charging time for your new
handset is at least 12 hours.
Charge LED
SD4501 BW Handset.book Page 3 Tuesday, January 25, 2005 7:43 PM
To Next Page
Loading...
