28
Conference Calling
If one handset is already on a call, the display on other
handsets registered to the same base unit shows
Line in use.
Once a second handset is added to the call, the display
on all handsets shows On conference.
To connect a second handset to a call:
1 Press or DELETE on the second handset.
2 To join a conference call, press from the
base unit.
3 To disconnect from the conference call, press
on either or both handsets.
SD4501 BW Handset.book Page 28 Tuesday, January 25, 2005 7:43 PM
To Next Page
Loading...
