9
Setting Up
Naming a Handset or Base Station
When you register a handset, it is assigned a default
name of Handsets(X). The X represent the list of devices
registered to the base unit. (e.g., Handset(1), Camera(2),
etc.) The number assigned at registration remains part of
the name (e.g., Handset(1)).
1 Press Menu.
2 Scroll to Namehandset.
3 Press SELECT.
4 Enter new name using keypad (up to12 characters).
The flashing underline shows cursor position.
Use DELETE
to backspace and erase characters to left
of cursor.
SD4501 BW Handset.book Page 9 Tuesday, January 25, 2005 7:43 PM
To Next Page
Loading...
