Motorola SF500 - CONNECT & GO

3EN Connect & go
Connect & go
let’s get you connected
Note:
Motorola SF500 is a Bluetooth® Smart heart rate
monitor. Wireless connection to a Bluetooth® Smart
Ready
device enables transmission of heart rate data. Check your
phone or device manual for Bluetooth compatibility.
Tip: Wireless connection is setup by the Bluetooth® Smart
Ready device (no action is required on the SF500).
1
Status Light - Green Flash
Press Heart Rate button to turn on.
Wireless connection (optional).
W
3
Voice prompt:
“Welcome to the Motorola
SF500. Calibrate heart rate
sensor to get started.”
2
Press Heart Rate button to
calibrate.
Status Light - Yellow Flash
Voice prompt: “Sensor
calibration successful.”
Status Light - Green Flash
(Follow setup instructions by the
Bluetooth® Smart Ready device.)