Motorola T3 User Manual

System Description
Motorola, Inc. 570510-001-00 rev A Page 14 of 50
Radio
• 802.11b/g
o Beacon frame control
o Probe request response
o Broadcast on/off per SDID
o Listen mode client support
o DSS/OFDM modulation via 2.4Ghz transmitter
o Regulatory Domain: FCC Part 15c 15.247 and ETS 300 328
• Transmit power: 20dBm transmitter
o Customer configurable: 1 – 14, max. In 1dBm increments
o Max transmit power of 20dBm depends on regulatory country
• Two integrated omni-directional antennas
o 3.2dBi
o Antenna receive diversity
• Security Protocols – (per SSID)
o Wireless Client Isolation
o WEP/WPA/WPA2 - Enterprise
o 802.1x/EAP
o EAP types: TLS, PEAPv0, TTLS
o AES, TKIP encryption
• QoS
o Wireless Multimedia (WMM) priority
o WMM power save
o Spectralink ready
• Virtual AP mode
o Concurrent BSS (16)
o Per-BSS SSID
o Per-BSS client isolation
o Per-BSS 802.1Q VLANs
o Per-BSS authentication/encryption
o Per-BSS bitrate
• Two runtime images in flash, realtime firmware upgrade
• Client state, status and statistics
o MAC address of client
o Client link rate
o Client link strength (dBm)
o Packets tx/rx
o Authentication status
o SSID
o MAC address
• WLAN state information
o Signal strength and MAC of other APs
o Tx signal strength
o Packet Tx/Rx statistics

Motorola T3 Specifications

General

Brand	Motorola
Model	T3
Category	Cordless Telephone
Language	English