Alerts
Alerts
Channel Busy Indicator
When a channel is busy, the LED flashes twice per second.
Setting and Transmitting Call Tones
Your radio has 10 different call tones that you can transmit to other radios in your
group to alert them that you want to talk.
To set a call tone:
1. With the radio on, press 3 times. The current call tone setting flashes and
displays.
2. Press or to change and hear the call tone.
3. Press or to set the new call tone.
To transmit your call tone to other radios set to the same channel and Interference
Eliminator Code as your radio, press .
Note: Setting the call tone to disables the call tone feature.
Transmitting a Talk Confirmation Tone
You can set your radio to transmit a unique tone when you finish transmitting. It is
like saying Roger or Over to let others know you are finished talking.
• To turn talk confirmation on, press and hold while you turn the radio on. When
you release after transmitting, your confirmation tone transmits and displays.
• To turn talk confirmation off, turn your radio off and then back on while pressing and
holding .
25
To Next Page
Loading...
