Set The Channel:
1. With radio on, press Menu button, Current channel will begin to flash. Fig. 5.
2. Use Scroll buttons to change channel while flashing.
3. Press Menu or Push-To-Talk button to set new channel.
Figure 5
Time-out Timer:
The Time-out Timer feature helps extend battery life by preventing accidental transmission. The radio will emit a
continuous warning tone after the Push-To-Talk button is pressed for 60 continuous seconds and will stop
transmitting.
Menu/Lock Button:
You can be sure your menu settings won’t be changed accidentally. Just turn on the menu lock by pressing the
Menu button for three seconds. Now you’ll see a lock on the display. You can turn off the menu lock by pressing
the Menu button for three seconds again. The lock icon disappears from your display when it’s turned off.
6
Set The Code: (T5200 only)
1. With radio on, press Menu button twice. Fig. 5.
Current code will begin to flash.
2. Use Scroll buttons to change code while flashing.
3. Press Menu or Push-To-Talk button to set new code.
Note: Radio automatically saves channel (and code for T5200) after 5 seconds.
To Next Page
Loading...
Need help?
General
