Talking and Listening
18
Talking and Listening
To communicate, all radios in your group must be set to the
same channel (1-22) and Interference Eliminator Code
(0-99).
To talk, press and hold
M
. Hold the radio 2 to 3 inches
away from your mouth when talking.
When you finish talking, release
M
(press to talk, release to listen).
Talk Range
Your radio is designed to maximize performance and improve transmission
range. Do not use the radios closer than 5 feet apart.
Monitor Button
Pressing and holding J for 3 seconds allows you to listen to the volume level of
the radio when you are not receiving. This allows you to adjust the volume, if
necessary. You can also use J to check for activity on the current channel
before you transmit (talk).
99
22
4110w17b.book Page 18 Monday, August 18, 2003 3:01 PM
To Next Page
Loading...
