Alerts
27
For a 30-second period starting after the last transmission, all transmissions
received on the selected channel and code will pass through the QT noise filter.
VibraCall® Alert (Models T5920 and T5950 Only)
VibraCall is a vibrating alert that notifies you that your radio is receiving a
message. This is useful in noisy environments. When the alert is on, the radio
vibrates once every 30 seconds when you receive a message on the channel and
code you set.
• To turn vibrating alerts on, press
\ until i is displayed, then press ] to
display
Y.
• To turn vibrating alerts off, press
[ until < is displayed in the same menu.
4110w17b.book Page 27 Monday, August 18, 2003 3:01 PM
To Next Page
Loading...
