Ta l k in g
13
Signal Strength Indicator
Call Tone and Call Display
Don’t you hate it when you miss a call?
I mean it could be someone really important. A call you need to take right away. Or
worse, someone you’re trying to reach may not know that you’ve called because
their surroundings are too noisy.
Your radio can transmit ten different call tones. To set your call tone, select the
TWO
WAY mode and the SET CALL menu.The radio plays a sample of each tone as you scroll through
them. To use your call tone, just press
‰ to transmit it to others.
The signal strength indicator can help you determine when a
radio is moving out of range. It is a number displayed when
you’re receiving on the same channel and code as another
transmitting radio and it indicates the relative signal strength of
the transmitting radio:
1
is weakest (usually farthest away)
and
6
is strongest (usually closest).
Note: Obstacles that block the signal path may affect the
signal strength indicator function.
Signal Strength
You can always tell if someone using a T6000-
Series radio is trying to reach you when your
radio displays the call received screen...
b e f g h i
14 1 5
k lmnop
Signal strength indicator
b e f g h i
CALLRCVD
k lmnop
To Next Page
Loading...
