Getting Started
5
CommPort™ Charging Dock
The CommPort™ charging dock provides drop-in charging convenience. The charging dock
can be mounted or placed on any flat surface (such as a wall or workbench) and turns your
radio into a stationary intercom while keeping it charged and ready for any adventure.
To mount the charging dock:
• Wrap the power cord
under the charging dock.
Use the cutouts to hold
the cord in place.
• Attach using two #6 x ¾”
screws appropriate for the
mounting surface.
• Position the charger with the
hook on the LED end over
the left slot.
• Snap the hook on the cord
end into the right slot,
clamping the charger onto
the charging dock contacts
• Plug in the charger.
• Place the radio, or the NiMH
battery in the charger adapter
cover, into the CommPort
charging dock.
• When the LED turns solid
green, the battery is fully
charged.
Cutouts
To Next Page
Loading...
