Advanced Two-Way
32
Monitor
Using the monitor feature helps to improve the reception of your radio if you’re frequently
almost out of range. It also allows you to listen to a channel frequency without codes (carrier
squelch) to tell whether or not it’s currently in use. To use the monitor, select the
TWO WAY
mode and the
SET MON menu.
Reset
You can reset your menu settings to the default settings by turning your radio off and then
pressing |, {, and y at the same time.
Setting the Battery Type
The
SET BATT feature allows the battery meter to recognize and properly display the power
usage for either alkaline or aftermarket rechargeable single-cell nickel cadmium (NiCd)
batteries. To set the battery type feature, select the SETTINGS mode and then SET BATT. Press
x or z until your choice of ALKALINE or RECYCLE appears, then press { to set.
Your channel and code screen will look like this.
Yo u ’ll hear static if the channel frequency is unused.
Changing from two-way mode will turn monitor off.
Monitor On
b e f g h i
14 MON 1
k lmno p
To Next Page
Loading...
