Motorola TD1 User Manual

25Call block
5.1.4 Block all payphone calls
1. Press M, scroll d to Call Block and press M.
2. Enter the PIN (default 0000) and press M.
3. The display shows By CallType and press M.
4. Scroll d to Payphone , press M.
5. Press u or d to select On or O .
6. Press M to conrm.
7. Press e to return to standby.
5.2 Block by number
Your phone can block calls by number, you can store a full phone number or an area code.
If you are storing an individual number, you need to store the full number including the
dialling code.
5.2.1 Turn block by number on / o
1. Press M, scroll d to Call Block and press M.
2. Enter the PIN (default 0000) and press M.
3. Scroll d to Blacklist and press M.
4. The display shows Block mode , press M.
5. Press u or d to select either O , Block all , Allow Vip or Block Blist .
If you select Allow Vip scroll u or d to select either Always On or Start&End .
If you select Start&End the display shows Block from , enter the time you want to start
blocking calls and press M.
6. The display shows To, enter the time you want to block call to and press M.
7. Press e to return to standby.
5.2.2 View a number in the blocked call list
1. Press M, scroll d to Call Block and press M.
2. Enter the PIN (default 0000) and press M.
3. Scroll d to Blacklist and press M.
4. Scroll d to Block number and press M.
5. The display shows View , press M.
6. Scroll u or d to the entry you want to view .
7. Press M to view.
8. Press e to return to standby.

Motorola TD1 Specifications

General

Brand	Motorola
Model	TD1
Category	Cordless Telephone
Language	English