Motorola VM44-3 CONNECT - Scan Camera; Temperature

Parent Unit Menu Options
17
3.
Press the + UP button or - DOWN button to select del, and
press the OK button to confirm.
4. Camera / / / will pop up, press the + UP button or
- DOWN button to select the desired Camera, and press the OK
button.
5.
OK button to delete that registration.
NOTE
You are not allowed to delete the camera if there is only one registered
camera in the system.
4.6.4 Scan camera
This function is only available when you have more than 1 Baby Unit
(Camera).
1.
Press the button and the menu bar will pop up.
2.
Press the < LEFT button or > RIGHT button until is
highlighted, and the
del/ add/ view/ scan menu will pop up.
3.
Press the + UP button or - DOWN button to select scan, and press
the OK button to confirm.
4. The screen will then display images from different registered
cameras in a loop of Camera / / /
every 12 seconds.
, changing about
TIP:
You can also press the OK button repeatedly to select the available camera
options from / / / , scan.
4.7 Temperature
1. Press the button and the menu bar will pop up.
2.
Press the < LEFT button or > RIGHT button until is
highlighted.
3.
Press OK button, then + UP / - DOWN to select °C or °F.
Press the + UP button or - DOWN button to select , then press the