Motorola VT100 User Manual

QUICKSTART GUIDE | VT100 11
VT100 KLICK FAST STUD
To attach a Klick Fast stud to your VT100, you will need:
• A VT100
• A VT100 Klick Fast Stud (VT-100-FIX-KF-ALT)
• A Klick Fast dock (usually on a uniform),
Firstly, pinch the two metal clips on the back of the stud together, and slide the attachment into the mounting
rail on the back of your device until a firm click is heard. Release the metal clips.
Slide the VT100 into the Klick Fast dock upside-down, so the device’s serial number is pointing towards the
ceiling. Once the stud is firmly attached to the dock, rotate the VT100 by twisting it until it is the right way up.
To detach a Klick Fast stud from the Klick Fast dock, rotate the device by 180 degrees, so the VT100 is upside
down again. The stud should slide out of the dock easily. It is now possible to detach the stud from the VT100.
To do so, pinch the two metal clips on the back of the stud together, and slide the stud upwards out of the
attachment rail.

Motorola VT100 Specifications

General

Brand	Motorola
Model	VT100
Category	Digital Camera
Language	English