QUICKSTART GUIDE | VT100 12
VT100 SPORTS CAMERA PILLAR
To attach a sports camera pillar to your VT100, you will need:
• A VT100
• A VT100 Sports Camera Pillar (VT-100-FIX-SPORT)
• A sports camera accessory to attach the camera to
• A securing pin (usually supplied with the sports camera accessory)
• A securing nut (usually permanently attached to the sports camera accessory)
Firstly, pinch the two metal clips on the back of the stud together, and slide the attachment into the mounting
rail on the back of your device until a firm click is heard. Release the metal clips.
Slide the sports camera pillar between the teeth of the accessory, so the holes align. Push the securing pin
through the two components, and into the securing nut
To detach a VT100 from the sports camera stud, pinch the two metal clips on the back of the stud together, and
slide the stud (with the sports camera pillar) upwards out of the attachment rail.
To Next Page
Loading...
Need help?
General
